PETG Filament Grey fun titẹ sita 3D
Ọja Awọn ẹya ara ẹrọ
| Brand | Torwell |
| Ohun elo | SkyGreen K2012 / PN200 |
| Iwọn opin | 1.75mm / 2.85mm / 3.0mm |
| Apapọ iwuwo | 1 kg/spool;250g/spool;500g/spool;3kg / spool;5kg/spool;10kg / spool |
| Iwon girosi | 1.2Kg/spool |
| Ifarada | ± 0.02mm |
| Gigun | 1.75mm (1kg) = 325m |
| Ibi ipamọ Ayika | Gbẹ ati ventilated |
| Eto gbigbe | 65˚C fun wakati 6 |
| Awọn ohun elo atilẹyin | Waye pẹlu Torwell HIPS, Torwell PVA |
| Ifọwọsi iwe-ẹri | CE, MSDS, arọwọto, FDA, TUV, SGS |
| Ni ibamu pẹlu | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker ati eyikeyi miiran FDM 3D atẹwe |
| Package | 1 kg / spool;8spools/ctn tabi 10spools/ctnedidi ṣiṣu apo pẹlu desiccants |
Awọn awọ diẹ sii
Awọ Wa
| Awọ ipilẹ | Funfun, Dudu, Pupa, Blue, Yellow, Green, Grey, Silver, Orange, Transparent |
| Miiran awọ | Awọ adani wa |
Awoṣe Ifihan
Package
1kg eerun PETG filament pẹlu desiccant ni vaccum package.
Kọọkan spool ni olukuluku apoti (Torwell apoti, Neutral apoti, tabi adani apoti avilable).
8boxes fun paali (paadi iwọn 44x44x19cm).
Ohun elo Factory
Alaye siwaju sii
PETG Filament Gray jẹ ọja rogbodiyan ti o ṣajọpọ awọn abuda ti o dara julọ ti filament titẹ sita 3D olokiki meji - PLA ati ABS.O jẹ ohun elo ti o tọ ati iduroṣinṣin ti iyalẹnu ti o le duro awọn iwọn otutu giga ati omi, ti o jẹ ki o jẹ apẹrẹ fun ọpọlọpọ awọn ohun elo titẹ sita.
Ọkan ninu awọn anfani pataki ti filament yii ni pe o ni awọn iwọn iduroṣinṣin ati idinku kekere, eyiti o tumọ si pe o le ni rọọrun ṣe awọn awoṣe deede.Awọn ohun-ini itanna ti o dara ti filament tun jẹ ki o jẹ yiyan ti o dara julọ fun awọn paati itanna ati awọn ẹrọ.
It jẹ apẹrẹ fun ṣiṣẹda sihin tabi awọn atẹjade awọ pẹlu didan giga ti o da lori sisanra ogiri ati ohun orin.O le ṣaṣeyọri ipari bii gilasi kan lori awọn iṣẹ akanṣe rẹ, ṣiṣe wọn ni iyalẹnu ati iwunilori.
PETG Filament Grey jẹ apẹrẹ fun ṣiṣẹda sihin tabi awọn atẹjade awọ pẹlu didan giga ti o da lori sisanra ogiri ati ohun orin.O le ṣaṣeyọri ipari bii gilasi kan lori awọn iṣẹ akanṣe rẹ, ṣiṣe wọn ni iyalẹnu ati iwunilori.
Pẹlu filamenti yii, o le tẹjade awọn apẹẹrẹ iṣẹ-ṣiṣe ati awọn ẹya pẹlu agbara iyasọtọ ati agbara.Eyi jẹ ki o jẹ ohun elo ti o ni iye owo to munadoko ti o fun ọ ni ọja ti o gbẹkẹle ati pipẹ fun ọpọlọpọ awọn ohun elo.
Ni ipari, PETG Filament Gray jẹ ohun elo 3D ti o munadoko ati ti o wapọ pẹlu ọpọlọpọ awọn anfani pẹlu iwọn otutu giga ati resistance omi, iduroṣinṣin iwọn ati ipari didan.O jẹ ore ayika, rọrun lati ṣiṣẹ, ati ibaramu pẹlu ọpọlọpọ awọn atẹwe 3D lori ọja naa.Boya o jẹ olubere tabi alamọdaju, filament yii yoo bo gbogbo awọn iwulo titẹ sita 3D rẹ.Nitorina kilode ti o duro?Bẹrẹ lilo PETG Filament Grey loni ki o mu awọn iṣẹ titẹ sita rẹ si ipele ti atẹle!
| iwuwo | 1,27 g / cm3 |
| Atọka Sisan Yo (g/10min) | 20(250℃/2.16kg) |
| Ooru Distortion Temp | 65℃, 0.45MPa |
| Agbara fifẹ | 53 MPa |
| Elongation ni Bireki | 83% |
| Agbara Flexural | 59.3MPa |
| Modulu Flexural | 1075 MPa |
| IZOD Ipa Agbara | 4.7kJ/㎡ |
| Iduroṣinṣin | 8/10 |
| Titẹ sita | 9/10 |
| Ìwọ̀n òtútù (℃) | 230 - 250 ℃ |
| Iwọn otutu ibusun (℃) | 70 – 80°C |
| Nozzle Iwon | ≥0.4mm |
| Iyara Fan | LOW fun didara dada to dara julọ / PA fun agbara to dara julọ |
| Titẹ titẹ Iyara | 40 - 100mm / s |
| Kikan Ibusun | Ti beere fun |
| Niyanju Kọ dada | Gilasi pẹlu lẹ pọ, Masking iwe, Blue teepu, BuilTak, PEI |
