Torwell ABS Filament 1.75mm fun itẹwe 3D ati pen 3D
Ọja Awọn ẹya ara ẹrọ
| Brand | Torwell |
| Ohun elo | QiMei PA747 |
| Iwọn opin | 1.75mm / 2.85mm / 3.0mm |
| Apapọ iwuwo | 1 kg/spool;250g/spool;500g/spool;3kg / spool;5kg/spool;10kg / spool |
| Iwon girosi | 1.2Kg/spool |
| Ifarada | ± 0.03mm |
| Gigun | 1.75mm (1kg) = 410m |
| Ibi ipamọ Ayika | Gbẹ ati ventilated |
| Eto gbigbe | 70˚C fun wakati 6 |
| Awọn ohun elo atilẹyin | Waye pẹlu Torwell HIPS, Torwell PVA |
| Ifọwọsi iwe-ẹri | CE, MSDS, arọwọto, FDA, TUV, SGS |
| Ni ibamu pẹlu | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker ati eyikeyi miiran FDM 3D atẹwe |
Awọn awọ diẹ sii
Awọ Wa:
| Awọ ipilẹ | Funfun, Dudu, Pupa, Buluu, Yellow, Alawọ ewe, Iseda, |
| Miiran awọ | Fadaka, Grẹy, Awọ, Goolu, Pink, eleyi ti, Orange, Yellow-goolu, Igi, alawọ ewe Keresimesi, Awọ bulu, Ọrun buluu, Sihin |
| Fuluorisenti jara | Pupa Fuluorisenti, Yellow Fuluorisenti, Alawọ ewe Fuluorisenti, Buluu Fuluorisenti |
| Imọlẹ jara | Alawọ ewe Imọlẹ, Buluu Imọlẹ |
| Awọ iyipada jara | Buluu alawọ ewe si alawọ ewe ofeefee, Buluu si funfun, eleyi ti si Pink, Grẹy si Funfun |
| Gba Onibara PMS Awọ |
Awoṣe Ifihan
Package
1kg eerun ABS filament pẹlu desiccant ni vaccum package.
Kọọkan spool ni olukuluku apoti (Torwell apoti, Neutral apoti, tabi Adani apoti wa).
8boxes fun paali (paadi iwọn 44x44x19cm).
Ohun elo Factory
Akọsilẹ pataki
Jọwọ ṣe filamenti nipasẹ iho ti o wa titi lati yago fun awọn tangles lẹhin lilo.1.75 ABS filament nilo ibusun-ooru ati oju titẹ sita to dara lati yago fun ijagun.Awọn ẹya nla ni itara lati ja ni awọn atẹwe inu ile ati õrùn nigbati titẹ ba lagbara ju pẹlu PLA.Lilo raft tabi brim tabi dinku iyara fun ipele akọkọ le ṣe iranlọwọ lati yago fun ijagun.
FAQ
Kilode ti awọn filaments ko le duro si ibusun kikọ?
1. Ṣayẹwo ipo iwọn otutu ṣaaju titẹ sita, awọn filaments ABS ni iwọn otutu extrusion ti o ga julọ;
2. Ṣayẹwo ti o ba ti lo dada awo fun igba pipẹ, o niyanju lati paarọ rẹ pẹlu tuntun wa lati rii daju pe adhesion Layer akọkọ ti o lagbara;
3. Ti ipele akọkọ ba ni ifaramọ ti ko dara, o niyanju lati tun-ipele sobusitireti titẹjade lati dinku aaye laarin nozzle ati awo ilẹ;
4. Ti ipa naa ko ba dara, o niyanju lati gbiyanju titẹ sita ṣaaju titẹ.
| iwuwo | 1,04 g / cm3 |
| Atọka Sisan Yo (g/10min) | 12 (220℃/10kg) |
| Ooru Distortion Temp | 77℃, 0.45MPa |
| Agbara fifẹ | 45 MPa |
| Elongation ni Bireki | 42% |
| Agbara Flexural | 66.5MPa |
| Modulu Flexural | 1190 MPa |
| IZOD Ipa Agbara | 30kJ/㎡ |
| Iduroṣinṣin | 8/10 |
| Titẹ sita | 7/10 |
| Ìwọ̀n òtútù (℃) | 230 - 260 ℃Ti ṣe iṣeduro 240 ℃ |
| Iwọn otutu ibusun (℃) | 90 – 110°C |
| Nozzle Iwon | ≥0.4mm |
| Iyara Fan | LOW fun didara dada to dara julọ / PA fun agbara to dara julọ |
| Titẹ titẹ Iyara | 30 - 100mm / s |
| Kikan Ibusun | Ti beere fun |
| Niyanju Kọ dada | Gilasi pẹlu lẹ pọ, Masking iwe, Blue teepu, BuilTak, PEI |
